how to promote your youtube channel

SAFE WAYS ARE THE BEST WAYS

            The following points should be remembered and observed at all times:-

i.                      Consider everything unsafe /energized unless it is proven safe.

ii.                   Keep all floors, ladder, clean and fee of grease/ oil to avoid slipping / falling.

iii.                 Do not wear loose clothing when working around rotating machines.

iv.                 Carry ladders, tools and materials below waist level when working in switch yard.

v.                    Keep gasoline in safety Cane painted red.

vi.                 Never use gasoline for cleaning. Always use proper solvent for cleaning.

vii.               Practice good housekeeping habits.

viii.            Get help when lifting heavy objects.

ix.                 Wear goggles when chipping, drilling and using grinder etc.

x.                    Ascertain the location of firefighting equipment, and the purpose of each type of extinguisher.

QUESTIONS   

Complete the following statements by inserting the missing word.

i.                    Working method around electrical lines and equipment are usually adopted when they are ___________ methods.

ii.                 Apparatus is considered to be ____________ to approach until it has been proven otherwise.

iii.               Neckties are hazard when working around _______ machinery.

iv.               Gasoline is stored in a ___________ Cane.

v.                  General cleaning is done with cleaning ____________.

vi.               Ladders and long tools or materials are more safely carried _______ belt level.

vii.             Lifting should be done with the _________ muscles.

viii.          When chipping and grinding, injury to the eyes is prevented by wearing _____

                                                 1 SELF CHECK QUESTIONS

            The following five safety principles are incomplete and in incorrect order. Complete each principle by placing the correct word in the blanks and the corresponding number in the space provided.

i.                    ____________ the hazards when they cannot be removed.

ii.                  know and ________ the hazard

iii.               __________ injuries when hazard is out of control

iv.               ___________ the  ____________ of injury if an injury occurs.

v.                  ______________  the  hazard  if possible.

                                              2 SELF CHECK QUESTIONS 

            In each of the following cases, one of the five safety principles is being applied. Indicate which principle is applied by placing the corresponding number in the space provided.

i.                    A foreman was requested to perform maintenance of CB. Before applying for PTW he discussed  the safety aspects of the job with his AE.  Safety principle No. _______.

ii.                 A fitter was going to work in an area where the noise level was above 90 dbs and the time for the work was more than one hour. So before entering the area he put on appropriate hearing protection. Safety Principle No. ________   

iii.               A worker injured his hand while cutting a piece of metal with hacksaw. He received immediate first aid treatment for the injury. Safety Principal No. ___

iv.               A foreman was required to perform some repair work in an enclosed area. Before starting the work, he checked to make sure that the area is continuously vented to prevent the accumulation of hazardous welding fumes. Safety principle No. __________.

v.                  A foreman made himself familiar with all hazards associated with replacement of the electric motor on a pump. He then took out necessary work protection to ensure that the system is electrically and mechanically isolated and de-energized. Safety principle No. _______.