- Get link
- Other Apps
FIRE CLASSES AND EXTINGUISHERS FOR EACH
what is fire ?
Fire is a three item combination (Oxygen +Material+Ark)
Fire Class
|
Includes
|
Extinguisher
|
A
|
Paper, Wood
|
Water, sand, foam (or soda acid), Halon gas
|
B
|
Electrical
|
CO2, Halon, Dry Chemical Powder
|
C
|
Chemical (oil, paint grease etc.)
|
Halon, dry chemical powder, foam
|
D
|
Metals
|
Water, sand, halon
|
CO2 extinguishers clean the equipment. Dry chemical powder / foam type extinguishers make the equipment dirty and damage the wiring.
SHOP RULES
1. Do not use shop machinery until you are trained.
2. Grease / oil on floor must be removed immediately to avoid slipping / falling.
3. Keep all tools in their proper place.
4. Wear eye protection when necessary
5. All the tools must be kept clean.
6. After the completion of job with tools, dry and clean them and return them to their proper location.
7. Do not use damaged tools.
8. Long hairs / loose clothing should be confined when working around rotating machines WHEN TO USE EYE PROTECTIVE
1. When drilling
2. When chiseling or chipping
3. When grinding
4. When handling compressed air
5. When handling acids for preparation of electrolyte for lead acid battery.
6. When applying / removing PTGs.
7. When welding
8. When using power saws.
8.
- Get link
- Other Apps
Popular posts from this blog
what is the maximum current level a human body can withstand before sustaining injury
LOW VOLTAGE HAZARD Why Low Voltage is considered more dangerous than H.V? Generally electric hazard occurs due to low voltage, rather than high voltage because high voltages are inaccessible as they give warning to approaching persons prior to contact due to their electrostatic fields. But low voltages give no such warning and are felt only when they are
How can you perform contact resistance test of HT circuit breaker
SAFE WAYS ARE THE BEST WAYS The following points should be remembered and observed at all times:- i. Consider everything unsafe /energized unless it is proven safe. ii. Keep all floors, ladder, clean and fee of grease/ oil to avoid slipping / falling. iii. Do not wear loose clothing when working around rotating machines. iv. Carry ladders, tools and materials below waist level when working in switch yard. v. Keep gasoline in safety Cane painted red.
Comments